Message boards : Cafe Rosetta : something broke
Author | Message |
---|---|
tom Send message Joined: 29 Nov 08 Posts: 10 Credit: 6,044,733 RAC: 0 |
i've been running rosetta for years on a mac mini w/macos 10.7, until the switch to ssl. i switched the url (trivial), deleted and re-added rosetta, and i think i updated to a newer version of boic. and now all of a sudden i get a "computing error" on every single work unit, with 0 cpu time used. what broke? |
robertmiles Send message Joined: 16 Jun 08 Posts: 1232 Credit: 14,269,631 RAC: 4,447 |
Are you able to look at the BOINC log file? If so, check for signs that at least one of the input files for each of those tasks could not be downloaded from the server. |
Grant (SSSF) Send message Joined: 28 Mar 20 Posts: 1670 Credit: 17,494,103 RAC: 24,547 |
I'd suggest detaching from the project again, reboot to make sure everything is deleted & cleared out, then re-attach again (using the new URL). Grant Darwin NT |
mikey Send message Joined: 5 Jan 06 Posts: 1895 Credit: 9,117,053 RAC: 6,397 |
i've been running rosetta for years on a mac mini w/macos 10.7, until the switch to ssl. You have a "Signal 11" error for every work unit, that's on your end "signal 11, or translated a segmentation error pointing to a problem with your memory, virtual memory (page file) or that it's a bad batch of tasks. However, if you're the only one returning these as an error and consistently over two or more projects, you best go look into a problem with the RAM or page file on that computer" |
William Albert Send message Joined: 22 Mar 20 Posts: 23 Credit: 1,069,070 RAC: 610 |
i've been running rosetta for years on a mac mini w/macos 10.7, until the switch to ssl. While a segfault can be caused by faulty hardware, WU's consistently segfaulting right away with no CPU time used points to a software problem. |
mikey Send message Joined: 5 Jan 06 Posts: 1895 Credit: 9,117,053 RAC: 6,397 |
i've been running rosetta for years on a mac mini w/macos 10.7, until the switch to ssl. True but no one else is screaming about them |
Endgame124 Send message Joined: 19 Mar 20 Posts: 63 Credit: 20,367,622 RAC: 24,152 |
I had this problem on one of my raspberry pis. Turns out I forgot to add the extra lines to cc_config.xml to enable arm support. Maybe this helps? |
tom Send message Joined: 29 Nov 08 Posts: 10 Credit: 6,044,733 RAC: 0 |
thanks for the suggestion, but i'm running a mac mini (macos 10.7) with an intel i7 processor. since a significant number of other users are probably using the same cpu chip, it isn't likely. |
tom Send message Joined: 29 Nov 08 Posts: 10 Credit: 6,044,733 RAC: 0 |
i've been running rosetta for years on a mac mini w/macos 10.7, until the switch to ssl. i wouldn't be "screaming" either, if i assumed that the work units just weren't coming in because of the covid lockdown, or i was too busy crunching other projects or with other stuff. i'll post a log file below, once i figure out how to do that. |
tom Send message Joined: 29 Nov 08 Posts: 10 Credit: 6,044,733 RAC: 0 |
i don't know what to look for, but here's today's "log file of rejection" (apologies for the formatting, or lack thereof): Thu 25 Jun 12:40:02 2020 | | Starting BOINC client version 7.16.6 for x86_64-apple-darwin Thu 25 Jun 12:40:03 2020 | | log flags: file_xfer, sched_ops, task, file_xfer_debug, work_fetch_debug Thu 25 Jun 12:40:03 2020 | | Libraries: libcurl/7.58.0 OpenSSL/1.1.0g zlib/1.2.5 c-ares/1.13.0 Thu 25 Jun 12:40:03 2020 | | Data directory: /Library/Application Support/BOINC Data Thu 25 Jun 12:40:03 2020 | | OpenCL CPU: Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz (OpenCL driver vendor: Apple, driver version 1.1, device version OpenCL 1.1) Thu 25 Jun 12:40:03 2020 | | No usable GPUs found Thu 25 Jun 12:40:03 2020 | | Host name: server.local Thu 25 Jun 12:40:03 2020 | | Processor: 8 GenuineIntel Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz [x86 Family 6 Model 42 Stepping 7] Thu 25 Jun 12:40:03 2020 | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe pni pclmulqdq dtes64 mon dscpl vmx est tm2 ssse3 cx16 tpr pdcm sse4_1 sse4_2 xapic popcnt aes pcid xsave osxsave tsctmr avx Thu 25 Jun 12:40:03 2020 | | OS: Mac OS X 10.7.5 (Darwin 11.4.2) Thu 25 Jun 12:40:03 2020 | | Memory: 8.00 GB physical, 112.31 GB virtual Thu 25 Jun 12:40:03 2020 | | Disk: 464.96 GB total, 112.06 GB free Thu 25 Jun 12:40:03 2020 | | Local time is UTC -4 hours Thu 25 Jun 12:40:03 2020 | | Last CPU benchmark was 37 days 13:04:30 ago Thu 25 Jun 12:40:03 2020 | | General prefs: from http://orbit.psi.edu/oah/ (last modified 28-Jun-2008 12:55:40) Thu 25 Jun 12:40:03 2020 | | Host location: none Thu 25 Jun 12:40:03 2020 | | General prefs: using your defaults Thu 25 Jun 12:40:03 2020 | | Reading preferences override file Thu 25 Jun 12:40:03 2020 | | Preferences: Thu 25 Jun 12:40:03 2020 | | max memory usage when active: 8192.00 MB Thu 25 Jun 12:40:03 2020 | | max memory usage when idle: 8192.00 MB Thu 25 Jun 12:40:03 2020 | | max disk usage: 112.09 GB Thu 25 Jun 12:40:03 2020 | | (to change preferences, visit a project web site or select Preferences in the Manager) Thu 25 Jun 12:40:03 2020 | | [work_fetch] Request work fetch: Prefs update Thu 25 Jun 12:40:03 2020 | | [work_fetch] Request work fetch: Startup Thu 25 Jun 12:40:03 2020 | | Setting up project and slot directories Thu 25 Jun 12:40:04 2020 | | Checking active tasks Thu 25 Jun 12:40:04 2020 | Rosetta@home | URL https://boinc.bakerlab.org/rosetta/; Computer ID 2431861; resource share 100 Thu 25 Jun 12:40:04 2020 | | Setting up GUI RPC socket Thu 25 Jun 12:40:04 2020 | | Checking presence of 0 project files Thu 25 Jun 12:40:04 2020 | | Running CPU benchmarks Thu 25 Jun 12:40:04 2020 | | Suspending computation - CPU benchmarks in progress Thu 25 Jun 12:40:33 2020 | Rosetta@home | project resumed by user Thu 25 Jun 12:40:33 2020 | | [work_fetch] Request work fetch: project resumed Thu 25 Jun 12:40:35 2020 | | Benchmark results: Thu 25 Jun 12:40:35 2020 | | Number of CPUs: 8 Thu 25 Jun 12:40:35 2020 | | 3106 floating point MIPS (Whetstone) per CPU Thu 25 Jun 12:40:35 2020 | | 8072 integer MIPS (Dhrystone) per CPU Thu 25 Jun 12:40:37 2020 | Rosetta@home | update requested by user Thu 25 Jun 12:40:37 2020 | | [work_fetch] Request work fetch: project updated by user Thu 25 Jun 12:40:39 2020 | Rosetta@home | piggyback_work_request() Thu 25 Jun 12:40:39 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:40:39 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:40:39 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:40:39 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:40:39 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:40:39 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:40:39 2020 | Rosetta@home | [work_fetch] share 1.000 Thu 25 Jun 12:40:39 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:40:39 2020 | Rosetta@home | piggyback: resource CPU Thu 25 Jun 12:40:39 2020 | Rosetta@home | [work_fetch] set_request() for CPU: ninst 8 nused_total 0.00 nidle_now 8.00 fetch share 1.00 req_inst 8.00 req_secs 174240.00 Thu 25 Jun 12:40:39 2020 | Rosetta@home | [work_fetch] request: CPU (174240.00 sec, 8.00 inst) Thu 25 Jun 12:40:39 2020 | Rosetta@home | Sending scheduler request: Requested by user. Thu 25 Jun 12:40:39 2020 | Rosetta@home | Requesting new tasks for CPU Thu 25 Jun 12:40:41 2020 | Rosetta@home | Scheduler request completed: got 0 new tasks Thu 25 Jun 12:40:41 2020 | Rosetta@home | No tasks sent Thu 25 Jun 12:40:41 2020 | Rosetta@home | Project requested delay of 31 seconds Thu 25 Jun 12:40:41 2020 | | [work_fetch] Request work fetch: RPC complete Thu 25 Jun 12:40:46 2020 | | choose_project(): 1593103246.468618 Thu 25 Jun 12:40:46 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:40:46 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:40:46 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:40:46 2020 | Rosetta@home | [work_fetch] REC 0.307 prio 0.000 can't request work: scheduler RPC backoff (25.94 sec) Thu 25 Jun 12:40:46 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:40:46 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:40:46 2020 | Rosetta@home | [work_fetch] share 0.000 Thu 25 Jun 12:40:46 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:40:46 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:40:46 2020 | Rosetta@home | skip: scheduler RPC backoff Thu 25 Jun 12:40:46 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:41:12 2020 | | [work_fetch] Request work fetch: Backoff ended for Rosetta@home Thu 25 Jun 12:41:16 2020 | | choose_project(): 1593103276.549328 Thu 25 Jun 12:41:16 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:41:16 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:41:16 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:41:16 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:41:16 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:41:16 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:41:16 2020 | Rosetta@home | [work_fetch] share 1.000 Thu 25 Jun 12:41:16 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:41:16 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:41:16 2020 | Rosetta@home | can fetch CPU Thu 25 Jun 12:41:16 2020 | Rosetta@home | CPU needs work - buffer low Thu 25 Jun 12:41:16 2020 | Rosetta@home | checking CPU Thu 25 Jun 12:41:16 2020 | Rosetta@home | [work_fetch] set_request() for CPU: ninst 8 nused_total 0.00 nidle_now 8.00 fetch share 1.00 req_inst 8.00 req_secs 174240.00 Thu 25 Jun 12:41:16 2020 | Rosetta@home | CPU set_request: 174240.000000 Thu 25 Jun 12:41:16 2020 | Rosetta@home | [work_fetch] request: CPU (174240.00 sec, 8.00 inst) Thu 25 Jun 12:41:16 2020 | Rosetta@home | Sending scheduler request: To fetch work. Thu 25 Jun 12:41:16 2020 | Rosetta@home | Requesting new tasks for CPU Thu 25 Jun 12:41:17 2020 | Rosetta@home | Scheduler request completed: got 0 new tasks Thu 25 Jun 12:41:17 2020 | Rosetta@home | No tasks sent Thu 25 Jun 12:41:17 2020 | Rosetta@home | Project requested delay of 31 seconds Thu 25 Jun 12:41:17 2020 | Rosetta@home | [work_fetch] backing off CPU 805 sec Thu 25 Jun 12:41:17 2020 | | [work_fetch] Request work fetch: RPC complete Thu 25 Jun 12:41:22 2020 | | choose_project(): 1593103282.606869 Thu 25 Jun 12:41:22 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:41:22 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:41:22 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:41:22 2020 | Rosetta@home | [work_fetch] REC 0.307 prio 0.000 can't request work: scheduler RPC backoff (25.95 sec) Thu 25 Jun 12:41:22 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:41:22 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:41:22 2020 | Rosetta@home | [work_fetch] share 0.000 project is backed off (resource backoff: 800.16, inc 600.00) Thu 25 Jun 12:41:22 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:41:22 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:41:22 2020 | Rosetta@home | skip: scheduler RPC backoff Thu 25 Jun 12:41:22 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:41:48 2020 | | [work_fetch] Request work fetch: Backoff ended for Rosetta@home Thu 25 Jun 12:41:52 2020 | | choose_project(): 1593103312.687143 Thu 25 Jun 12:41:52 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:41:52 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:41:52 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:41:52 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:41:52 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:41:52 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:41:52 2020 | Rosetta@home | [work_fetch] share 0.000 project is backed off (resource backoff: 770.08, inc 600.00) Thu 25 Jun 12:41:52 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:41:52 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:41:52 2020 | Rosetta@home | can't fetch CPU: project is backed off Thu 25 Jun 12:41:52 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:42:52 2020 | | choose_project(): 1593103372.857669 Thu 25 Jun 12:42:52 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:42:52 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:42:52 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:42:52 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:42:52 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:42:52 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:42:52 2020 | Rosetta@home | [work_fetch] share 0.000 project is backed off (resource backoff: 709.91, inc 600.00) Thu 25 Jun 12:42:52 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:42:52 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:42:52 2020 | Rosetta@home | can't fetch CPU: project is backed off Thu 25 Jun 12:42:52 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:43:53 2020 | | choose_project(): 1593103433.017598 Thu 25 Jun 12:43:53 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:43:53 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:43:53 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:43:53 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:43:53 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:43:53 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:43:53 2020 | Rosetta@home | [work_fetch] share 0.000 project is backed off (resource backoff: 649.75, inc 600.00) Thu 25 Jun 12:43:53 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:43:53 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:43:53 2020 | Rosetta@home | can't fetch CPU: project is backed off Thu 25 Jun 12:43:53 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:44:53 2020 | | choose_project(): 1593103493.180618 Thu 25 Jun 12:44:53 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:44:53 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:44:53 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:44:53 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:44:53 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:44:53 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:44:53 2020 | Rosetta@home | [work_fetch] share 0.000 project is backed off (resource backoff: 589.59, inc 600.00) Thu 25 Jun 12:44:53 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:44:53 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:44:53 2020 | Rosetta@home | can't fetch CPU: project is backed off Thu 25 Jun 12:44:53 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:45:25 2020 | Rosetta@home | update requested by user Thu 25 Jun 12:45:25 2020 | | [work_fetch] Request work fetch: project updated by user Thu 25 Jun 12:45:28 2020 | Rosetta@home | piggyback_work_request() Thu 25 Jun 12:45:28 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:45:28 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:45:28 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:45:28 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:45:28 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:45:28 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:45:28 2020 | Rosetta@home | [work_fetch] share 1.000 Thu 25 Jun 12:45:28 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:45:28 2020 | Rosetta@home | piggyback: resource CPU Thu 25 Jun 12:45:28 2020 | Rosetta@home | [work_fetch] set_request() for CPU: ninst 8 nused_total 0.00 nidle_now 8.00 fetch share 1.00 req_inst 8.00 req_secs 174240.00 Thu 25 Jun 12:45:28 2020 | Rosetta@home | [work_fetch] request: CPU (174240.00 sec, 8.00 inst) Thu 25 Jun 12:45:28 2020 | Rosetta@home | Sending scheduler request: Requested by user. Thu 25 Jun 12:45:28 2020 | Rosetta@home | Requesting new tasks for CPU Thu 25 Jun 12:45:29 2020 | Rosetta@home | Scheduler request completed: got 0 new tasks Thu 25 Jun 12:45:29 2020 | Rosetta@home | No tasks sent Thu 25 Jun 12:45:29 2020 | Rosetta@home | Project requested delay of 31 seconds Thu 25 Jun 12:45:29 2020 | | [work_fetch] Request work fetch: RPC complete Thu 25 Jun 12:45:34 2020 | | choose_project(): 1593103534.301206 Thu 25 Jun 12:45:34 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:45:34 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:45:34 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:45:34 2020 | Rosetta@home | [work_fetch] REC 0.307 prio 0.000 can't request work: scheduler RPC backoff (25.99 sec) Thu 25 Jun 12:45:34 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:45:34 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:45:34 2020 | Rosetta@home | [work_fetch] share 0.000 Thu 25 Jun 12:45:34 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:45:34 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:45:34 2020 | Rosetta@home | skip: scheduler RPC backoff Thu 25 Jun 12:45:34 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:45:52 2020 | | [work_fetch] Request work fetch: Backoff ended for Rosetta@home Thu 25 Jun 12:45:54 2020 | | choose_project(): 1593103554.352940 Thu 25 Jun 12:45:54 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:45:54 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:45:54 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:45:54 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:45:54 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:45:54 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:45:54 2020 | Rosetta@home | [work_fetch] share 1.000 Thu 25 Jun 12:45:54 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:45:54 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:45:54 2020 | Rosetta@home | can fetch CPU Thu 25 Jun 12:45:54 2020 | Rosetta@home | CPU needs work - buffer low Thu 25 Jun 12:45:54 2020 | Rosetta@home | checking CPU Thu 25 Jun 12:45:54 2020 | Rosetta@home | [work_fetch] set_request() for CPU: ninst 8 nused_total 0.00 nidle_now 8.00 fetch share 1.00 req_inst 8.00 req_secs 174240.00 Thu 25 Jun 12:45:54 2020 | Rosetta@home | CPU set_request: 174240.000000 Thu 25 Jun 12:45:54 2020 | Rosetta@home | [work_fetch] request: CPU (174240.00 sec, 8.00 inst) Thu 25 Jun 12:45:54 2020 | Rosetta@home | Sending scheduler request: To fetch work. Thu 25 Jun 12:45:54 2020 | Rosetta@home | Requesting new tasks for CPU Thu 25 Jun 12:45:56 2020 | Rosetta@home | Scheduler request completed: got 0 new tasks Thu 25 Jun 12:45:56 2020 | Rosetta@home | Not sending work - last request too recent: 26 sec Thu 25 Jun 12:45:56 2020 | Rosetta@home | Project requested delay of 31 seconds Thu 25 Jun 12:45:56 2020 | Rosetta@home | [work_fetch] backing off CPU 401 sec Thu 25 Jun 12:45:56 2020 | | [work_fetch] Request work fetch: RPC complete Thu 25 Jun 12:46:01 2020 | | choose_project(): 1593103561.428058 Thu 25 Jun 12:46:01 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:46:01 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:46:01 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:46:01 2020 | Rosetta@home | [work_fetch] REC 0.307 prio 0.000 can't request work: scheduler RPC backoff (25.95 sec) Thu 25 Jun 12:46:01 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:46:01 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:46:01 2020 | Rosetta@home | [work_fetch] share 0.000 project is backed off (resource backoff: 395.60, inc 600.00) Thu 25 Jun 12:46:01 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:46:01 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:46:01 2020 | Rosetta@home | skip: scheduler RPC backoff Thu 25 Jun 12:46:01 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:46:27 2020 | | [work_fetch] Request work fetch: Backoff ended for Rosetta@home Thu 25 Jun 12:46:31 2020 | | choose_project(): 1593103591.505680 Thu 25 Jun 12:46:31 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:46:31 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:46:31 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:46:31 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:46:31 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:46:31 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:46:31 2020 | Rosetta@home | [work_fetch] share 0.000 project is backed off (resource backoff: 365.52, inc 600.00) Thu 25 Jun 12:46:31 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:46:31 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:46:31 2020 | Rosetta@home | can't fetch CPU: project is backed off Thu 25 Jun 12:46:31 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:47:31 2020 | | choose_project(): 1593103651.655769 Thu 25 Jun 12:47:31 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:47:31 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:47:31 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:47:31 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:47:31 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:47:31 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:47:31 2020 | Rosetta@home | [work_fetch] share 0.000 project is backed off (resource backoff: 305.37, inc 600.00) Thu 25 Jun 12:47:31 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:47:31 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:47:31 2020 | Rosetta@home | can't fetch CPU: project is backed off Thu 25 Jun 12:47:31 2020 | | [work_fetch] No project chosen for work fetch Thu 25 Jun 12:48:31 2020 | | choose_project(): 1593103711.804728 Thu 25 Jun 12:48:31 2020 | | [work_fetch] ------- start work fetch state ------- Thu 25 Jun 12:48:31 2020 | | [work_fetch] target work buffer: 180.00 + 21600.00 sec Thu 25 Jun 12:48:31 2020 | | [work_fetch] --- project states --- Thu 25 Jun 12:48:31 2020 | Rosetta@home | [work_fetch] REC 0.307 prio -1.000 can request work Thu 25 Jun 12:48:31 2020 | | [work_fetch] --- state for CPU --- Thu 25 Jun 12:48:31 2020 | | [work_fetch] shortfall 174240.00 nidle 8.00 saturated 0.00 busy 0.00 Thu 25 Jun 12:48:31 2020 | Rosetta@home | [work_fetch] share 0.000 project is backed off (resource backoff: 245.22, inc 600.00) Thu 25 Jun 12:48:31 2020 | | [work_fetch] ------- end work fetch state ------- Thu 25 Jun 12:48:31 2020 | Rosetta@home | choose_project: scanning Thu 25 Jun 12:48:31 2020 | Rosetta@home | can't fetch CPU: project is backed off Thu 25 Jun 12:48:31 2020 | | [work_fetch] No project chosen for work fetch |
tom Send message Joined: 29 Nov 08 Posts: 10 Credit: 6,044,733 RAC: 0 |
that would make sense if the computer were showing any signs of misbehaving, or if i hadn't been running rosetta successfully for years, right up to the ssl changeover. neither the ram nor the paging file are likely to have changed at exactly that moment, and without affecting anything else. i'm guessing that it's a software setting somewhere, or an incompatibility with my antique operating system, rather than a a hardware problem. but if i'm wrong, i'll buy you a cappuccino. |
Mod.Sense Volunteer moderator Send message Joined: 22 Aug 06 Posts: 4018 Credit: 0 RAC: 0 |
Presently, there are no R@h work units available for download. More coming soon (as is always the case). Rosetta Moderator: Mod.Sense |
tom Send message Joined: 29 Nov 08 Posts: 10 Credit: 6,044,733 RAC: 0 |
thanks, that’s good to know. in the meantime, i notice messages in the log about “daily quota of 1 exceeded”. it’s really, really hard to test whether things are working when i have to wait 24 hours to try again... so how can i request that this daily quota thing be increased to something more reasonable, like maybe *2*? |
Brian Nixon Send message Joined: 12 Apr 20 Posts: 293 Credit: 8,432,366 RAC: 0 |
i notice messages in the log about “daily quota of 1 exceeded”.That’s probably due to all the failed tasks. Like you say: “something broke” – but it’s not clear what. I’d suggest shutting down and uninstalling BOINC, removing the data directory /Library/Application Support/BOINC Data, then reinstalling and starting from clean. To start with, set Use at most 13% of the CPUs, Store at least 0.1 days of work and Store up to an additional 0 days of work, to download a single task and avoid your machine being swamped with tasks that might all fail. |
Grant (SSSF) Send message Joined: 28 Mar 20 Posts: 1670 Credit: 17,494,103 RAC: 24,547 |
so how can i request that this daily quota thing be increased to something more reasonable, like maybe *2*?Each time you return Valid work, the daily limit is doubled. Grant Darwin NT |
Message boards :
Cafe Rosetta :
something broke
©2024 University of Washington
https://www.bakerlab.org